WAKOL D 3320 PVC Adhesive

R1,205.00 inc. VAT

Scope of application

For laying PVC design floorings, textile floorings with PVC, PUR or latex fittings on absorbent subfloors, homogeneous PVC flooring in sheets and tiles and CV flooring on all absorbent and non-absorbent subfloors.

Dispersion adhesive for the laying of:

• LVT Flooring
• Homogeneous rubber flooring up to a thickness of 2.5 mm
• Heterogeneous rubber flooring up to a thickness of 4 mm
• Textile flooring with PVC, PUR or latex on properly prepared absorbent subfloors indoors.
• Homogeneous and heterogeneous PVC flooring in strips and tiles
• CV Flooring on properly prepared absorbent and non-absorbent subfloors indoors.

Subfloors

The subfloor as well as the room climate conditions must meet the requirements of the applicable standards and data sheets. Subfloors must be permanently dry, solid, level, free from cracks, dirt and adhesion-inhibiting substances.

Apply appropriate Wakol levelling compounds to severely uneven subfloors. The technical information on the primers and levelling compounds must be heeded.

Lay PVC and CV flooring on non-absorbent subfloors with the pressure-sensitive bonding method. Bonding during the pressure-sensitive bonding phase may allow increased residual indentation characteristics.

Usage

Stir adhesive well before using. Using a notched trowel, apply uniformly on the subfloor, without letting the adhesive pool. Precisely lay the flooring after an appropriate airing time and press it down firmly. After a short time, press it down again.

Rubber flooring and LVT flooring must generally be laid while the adhesive is still wet and a floor roller should be used again approximately 1 hour after laying.

For non-absorbent subfloors, wait until the start of the bonding phase before laying the floor covering. After a short time, press it down again.

DOWNLOAD TECHNICAL INFO SHEET / DOWNLOAD SAFETY DATA SHEET

Weight 12 kg
Dimensions 29 × 29 × 23 cm
Area of application:

Dispersion adhesive for laying LVT flooring, caoutchouc flooring up to 4 mm layer thickness, textile flooring with PVC, PUR or latex fittings on absorbent subfloors, homogeneous PVC flooring in sheets and tiles and CV flooring on all absorbent and non-absorbent subfloors indoors. WAKOL D 3320 corresponds to DIN EN 14259.

Application method:

trowel notch size according to TKB A1, A2 or B1

Consumption:

approx. 250-450 g/m²

Airing time:

approx. 5-20 minutes on absorbent subfloors, approx. 30-40 minutes on non-absorbent subfloors

Open time:

approx. 30-50 minutes

Storage:

not below +5 °C, sensitive to frost

Base:

acrylate dispersion

EMICODE:

EC1 PLUS (Very low in emissions)

Reviews

There are no reviews yet.

Be the first to review “WAKOL D 3320 PVC Adhesive”

Your email address will not be published.

Shopping Cart
wakol-d-3320-pvc-adhesive-wakol